Underground wells

Ready-to-install plastic wells are a practical and cost-effective alternative to similar structures made of concrete, brick or other building materials. Thanks to the well-thought-out shape and the presence of stiffening ribs, this type of polymer product manufactured by KRAFT can be installed directly into the ground.
In addition, a plastic well has the following advantages:

• Versatility of use. A large selection of sizes (usable internal volume from 320 to 1930 litres) significantly expands the scope and place of application.
• Low weight contributes to high mobility of the product. Even the largest 2-cubic metre polymer well weighs no more than 100 kilograms. This greatly facilitates its transportation, and loading and unloading and installation operations do not require lifting equipment and can be performed manually by two or three workers.
• Affordable price. The purchase of a ready-made plastic well will be cheaper than the construction of a similarly sized and dimensioned object made of concrete or masonry stone.
• Strength, resistance to significant mechanical loads, reinforcement with stiffening ribs allow polyethylene wells to be installed in the ground without prior preparation.
• Reliability in operation and long service life. The service life of KRAFT plastic products reaches 50 years.
• Immunity to corrosion, ultraviolet radiation, temperature changes, and other external negative influences.
• Virtually maintenance-free. Throughout the entire service life, it is sufficient to perform a visual inspection to detect any external damage.
• High maintainability. Minor mechanical damage can be easily repaired.

All offered wells in the basic version are sealed products equipped with a manhole cover with a diameter of 70 cm. The colour of the manhole cover can be black or green.

Scope of application of plastic wells

KRAFT underground wells, made of high-strength, frost-resistant and waterproof polyethylene, due to their overall dimensions and internal useful volume, are widely used as:

• Telecommunication manholes. They are installed when laying electrical, telecommunication and other types of cable networks. As a rule, plastic underground manholes are used for placing connecting couplings, installing control devices, laying electrical, telephone or optical fibre cable stocks.
• Polyethylene sewer manholes are used for laying the external sewerage system and stormwater drainage. They are installed in places where sewer pipes are turned, at the points where several branches are collected into one, in places where one pipe diameter is changed to another. Thanks to the wells, it is possible to control the state of health of the sewerage system and minimise the risk of clogging.
• A plastic water well is installed at the point where a residential building, commercial or industrial building, or other object is connected to the central water supply system. As a rule, water meters are installed there. In addition, the size and internal volume of the polymer well is ideal for installing a pumping station when installing an autonomous water supply.
• Underground tank. Often, summer residents and homeowners use a plastic well for water collected during rain as a storage device. It is then used for irrigation or other household purposes.

Since plastic wells have a sealed casing after production, all the technological inlets and outlets necessary for operation are made according to the customer’s specifications. They can be of any diameter and located in different places.

Advantageous offer from KRAFT

All plastic products manufactured by KRAFT in Ukraine for more than 5 years fully comply with domestic and international standards. They are manufactured on modern equipment from environmentally friendly high-quality polyethylene. You can buy both standard plastic wells from us and order a product for specific purposes. Our specialists will make the necessary calculations and develop a design of a well of the required strength and configuration.
KRAFT provides its customers with the following:

• Competitive prices for quality products.
• Warranty for a period of 24 to 60 months, with an actual service life of at least 50 years.
• Free expert advice.
• Professional installation and maintenance.

By calling the contact phone number, you can get more information about a specific model of plastic well, as well as find out how much delivery and on-site installation costs.